Sharp AR-M550U - Page 36

TROUBLE CODES
36
February 2005
Code Sub Content of trouble Detection
00
Heat roller low temperature detection (HL1).
01
Heat roller low temperature detection (HL2).
H4
02
Heat roller low temperature detection (HL3).
H5
01
5-time continuous POD not reached jam detection.
L1
00
Scanner feed trouble.
L3
00
Scanner return trouble.
01
Main motor lock detection.
02
Drum motor lock detection.
03
Fusing motor lock detection.
04
Developing motor lock detection.
06
Transfer belt separation motor trouble.
30
Controller fan motor trouble. MFP control
L4
31
Paper discharging fan trouble. MFP control
L6
10
Polygon motor lock detection. PCU
L8
01
No full wave signal. PCU
PC
Personal counter uninstalled. MFP control
PF
-
RIC copy inhibit command receive. MFP control
01
Fax battery abnormality. MFP control
U1
02
RTC read error(combined use as fax, on MFP control pwb). MFP control
00
EEPROM read/write error. MFP control
11
Counter sum check error (MFP control EEPROM). MFP control
12
Adjustment value check sum error (MFP control EEPROM). MFP control
22
MFPC section SRAM memory sum check error. MFP control
23
MFPC section SRAM memory individual data check sum error. MFP control
50
HDD section individual data sum check error. MFP control
80
Scanner section EEPROM read/write. Scanner
81
Scanner section memory sum check error. Scanner
90
PCU section EEPROM read/write error. PCU
U2
91
PCU section memory sum check error. PCU
30
SPF tray lift up trouble. Scanner
U5
31
SPF tray lift down trouble. Scanner
09
LCC lift motor trouble. PCU
20
LCC communication trouble. PCU
21
LCC transport motor trouble. PCU
U6
22
LCC 24v power abnormality addition. PCU
U7
00
PC/Modem communication trouble. MFP control
--
-
Auditor not ready MFP control