AY-X36RU
AE-X36RU
37
7. Remove the three (3) screws xing the control box cover.
8. Cut the three (3) xing bands.
9. Disconnect the connectors.
9-1. Disconnect the seven (7) connectors.
9-2. Disconnect the four (4) connectors.
9-3. Disconnect the six (6) connectors.
9-4. Disconnect the three (3) connectors after removing the
lock part.
10. Remove the nine (9) screws xing the PWB.
11. Loosen the three (3) xing bands xing the lead wire.
12. Cut the xing band and unscrew the two (2) screws
To Next Page
Loading...
