Sharp AY-X36RU - Page 38

38
AY-X36RU
AE-X36RU
13. Remove the three (3) screws xing the control box assembly.
14. Remove the four (4) screws xing the heat sink.
15. Disconnect the two (2) connectors and remove the three (3)
screws xing the reactor.
16. Remove the one (1) screw xing the reactor box cover.
17. Disconnect the two (2) connectors and remove the four (4)
screws xing the reactor.
18. Remove the four (4) screws xing the reactor box.
19. Cut the four (4) xing bands.
20. Remove the topside compressor cover.
21. Remove the compressor cover.
22. Remove the nut xing the terminal cover.
Compressor
cover
Compressor
cover