Sharp AY-X36RU - Page 39

AY-X36RU
AE-X36RU
39
23. Disconnect the three (3) terminals (compressor lead wire)
and the two (2) terminals (thermistor lead wire).
24. Unhook the hook of the spring fixing the compressor heater
assembly.
25. Remove the damper rubber.
26. Turn the coil and remove it.
27. Remove the nut xing the propeller fan.
28. Loosen the xing band xing the lead wire.
29. Cut the three (3) xing bands.
30. Cut the insulator.
Cut
Damper
rubber