1-7-7
E9656DC
< Method 2 >
Note: When servicing, do not touch white resin part
as shown below.
1. Remove the Top Cover, the Front Assembly and
the DVD Mechanism & DVD Main CBA Assembly.
Then, remove the DVD Mechanism Unit.
2. Remove two screws, and remove the Insulating
Plate.
3. Release two Locking Tabs, and lift up one side of
the Clamper Assembly.
4. Release the other side of two Locking Tabs, and
remove the Clamper Assembly.
5. Remove the disc.
Screw
Insulating Plate
Do not touch!
Locking Tabs
Clamper Assembly
Locking Tabs
Clamper Assembly
Disc
To Next Page
Loading...
