1-7-1
E9656DC
CABINET DISASSEMBLY INSTRUCTIONS
1. Disassembly Flowchart
This flowchart indicates the disassembly steps to gain
access to item(s) to be serviced. When reassembling,
follow the steps in reverse order. Bend, route, and dress
the cables as they were originally.
1 : Identification (location) No. of parts in the figures
2 : Name of the part
3 : Figure Number for reference
4 : Identification of parts to be removed, unhooked,
unlocked, released, unplugged, unclamped, or de-
soldered.
P=Spring, L=Locking Tab, S=Screw,
CN=Connector,
*=Unhook, Unlock, Release, Unplug, or Desolder
e.g. 6(S-1) = six Screws (S-1),
5(L-1) = five Locking Tabs (L-1)
5 : Refer to "Reference Notes."
2. Disassembly Method
↑↑↑ ↑ ↑
123 4 5
[1] Top Cover
[2] Front
Assembly
[4] Radiation
Sheet
[3] Front
Bracket
[5] Jack
Bracket
[6] Jack CBA
[7] DVD
Mechanism
& DVD Main
CBA Assembly
[8] Rear
Panel Unit
[9] Power
Supply CBA
[10] DC
Fan Motor
[11] PCB
Holder
[12] Rear
Panel
[13] Bracket R
[15] Deck
Assembly
[19] Deck
Pedestal
[17] Function
CBA
[14] VCR
Chassis Unit
[16] Power
SW CBA
[18] Main
CBA
[20] Front
Bracket R
ID/
LOC.
No.
PART
REMOVAL
Fig.
No.
REMOVE/*UNHOOK/
UNLOCK/RELEASE/
UNPLUG/DESOLDER
Note
[1] Top Cover D1 6(S-1) ---
[2]
Front
Assembly
D2
*5(L-1), *3(L-2),
*CN1609
1
1-1
1-2
1-3
[3]
nt
Bracket
D2 ---
[4]
Radiation
Sheet
D2 ---------- ---
[5]
Jack
Bracket
D3 2(S-4) ---
[6] Jack CBA D3 Jack Earth Plate ---
[7]
DVD
Mechanism
& DVD
Main CBA
Assembly
D4
2(S-5A), 2(S-5B),
*CN2204, *CN201
---
Fro 2(S-2), (S-3), Shield
Plate
[8]
[9]
[10]
Rear Panel
Unit
D5
5(S-6), 3(S-7), (S-8),
*CN101, *CN102
---
[11]
Power
Supply
CBA
---
[12]
DC Fan
Motor
D6 2(S-10), Earth Plate ---
[13]
PCB
Holder
D6 3(S-11) ---
[14]
Rear Panel
D6 ---------- ---
[16]
Bracket R D7 2(S-12) ---
[17]
VCR
Chassis
Unit
D7
5(S-13), 5(S-14),
(S-15), (S-16)
---
[15]
Deck
Assembly
D8
(S-17), (S-18),
Desolder
2
3
[19]
Power SW
CBA
D8 Desolder ---
[20]
Function
CBA
D8 Desolder ---
[18] Main CBA D8 ---------- ---
Deck
Pedestal
D9 8(S-19) ---
Front
Bracket R
D9 (S-20) ---
ID/
LOC.
No.
PART
REMOVAL
Fig.
No.
REMOVE/*UNHOOK/
UNLOCK/RELEASE/
UNPLUG/DESOLDER
Note
D6 4(S-9), AC Cord
NOTE: CBA AND PWB MEANS PRINTED WIRING
BOARD.
To Next Page
Loading...
