1-1-1
E9656SP
SPECIFICATIONS
Description Unit Minimum Nominal Maximum Remark
1. Video
1-1. Video Output
(
PB
)
Vp-p 0.8 1.0 1.2 SP Mode
SP Mode
SP Mode
SP Mode
SP Mode
SP Mode
SP Mode
SP Mode
SP Mode
SP Mode
E-E Mode
E-E Mode
E-E Mode
E-E Mode
SP Mode
SP Mode
SP Mode
SP Mode
SP Mode
SP Mode,
W/O Burst
1-2. Video Output
(
R/P
)
Vp-p 0.8 1.0 1.2
1-3. Video S/N Y
(
R/P
)
dB 40 45
1-4. Video Color S/N AM
(
R/P
)
dB 37 41
1-5. Video Color S/N PM
(
R/P
)
dB 30 36
1-6. Resolution
(
PB
)
Line 230 245
2. Servo
2-1. Jitter Low µsec 0.07 0.12
2-2. Wow & Flutter % 0.3 0.5
3. Normal Audio
3-1. Output
(
PB
)
dBV -9 -6 -3
3-2. Output
(
R/P
)
dBV -9 -6 -1.5
3-3. S/N
(
R/P
)
dB 36 41
3-4. Distortion
(
R/P
)
% 1.0 4.0
3-5. Freq. resp
(
R/P
)
at 200Hz dB -11 -4
(
-20dB ref. 1kHz
)
at 8kHz dB -14 -4
4. Tuner
4-1. Video output Vp-p 0.8 1.0 1.2
4-2. Video S/N dB 39 42
4-3. Audio output dB -10 -6 -2
4-4. Audio S/N dB 40 46
5. Hi-Fi Audio
5-1. Output dBV -12 -8 -4
5-2. Dynamic Range dB 70 85
5-3. Freq. resp
(
6dB B.W
)
Hz 20 ~ 20K
< VCR Section >
Note: Nominal specs represent the design specs. All units should be able to approximate these – some will exceed
and some may drop slightly below these specs. Limit specs represent the absolute worst condition that still might
be considered acceptable; In no case should a unit fail to meet limit specs.
To Next Page
Loading...
