Sharp ER-A440

79
Cashier reading and resetting
Using this function, you can take X and Z reports for individual cashiers or all cashiers.
Individual cashier reading and resetting
The OP X/Z-mode reading and resetting is allowed only when your machine has been programmed
for “OP X/Z mode available” in the PGM2 mode.
• Sample X report • Sample Z report
Note
Order total
Paid total
Cashier name
Average
Cashier no./cashier code
The subsequent printout occurs in the
same format as in the sample X report.
Full cashier reading and resetting
The subsequent printout occurs in the same format as in the
sample reports of individual cashier reading and resetting,
and sales data for cashiers print in this sequence.