[JOB#2641]
MESSAGE TEXT PROGRAMMING
X: Message No. = 1~87
Message
No.
Description MRS
1 Registration error ENTRY ERROR
2 Misoperation error MISOPERATION
3
Desired code is not
programmed yet.
NO RECORD
4 Paper empty PAPER EMPTY
5 Secret code error SECRET CODE
6 (reserved)
7 Memory is full MEMORY FULL
8 (reserved)
9 (reserved)
10 Stock is empty OUT OF STOCK
11
Compulsory of pushing the ST
key
SBTL COMPUL.
12 Compulsory of tendering TEND COMPUL.
13 (reserved)
14 (reserved)
15 (reserved)
16 (reserved)
17 (reserved)
18 (reserved)
19 (reserved)
20 (reserved)
21 (reserved)
22 Cashier changing error CASHIER ERR.
23 Cashier entry error ENTRY ERR CA
24 (reserved)
25 (reserved)
26 (reserved)
27 (reserved)
28 (reserved)
29 (reserved)
30 (reserved)
31
Compulsory of non-add code
entry
# COMPULSORY
32
The cashier key is not pushed
or inserted.
NOT ASSIGNED
33
The clerk key is changed in the
transaction
NOT CHANGE
34 Overflow limitation OVER LIMIT.
35 The open price entry is inhibited. INH. OPEN PR
36 The unit price entry is inhibited. INH. UNIT PR
37
The direct non-tendering
finalization after previous tender
entry is inhibited.
NOT NON-TEND
38
Service interruption during
Validation printing
P.OFF. IN VP
39 (reserved)
40 (reserved)
41 (reserved)
42 (reserved)
Message
No.
Description MRS
43 (reserved)
44 (reserved)
45 (reserved)
46 (reserved)
47 (reserved)
48 (reserved)
49 (reserved)
50 (reserved)
51 (reserved)
52 (reserved)
53 (reserved)
54 (reserved)
55 (reserved)
56 (reserved)
57 (reserved)
58 (reserved)
59 (reserved)
60 (reserved)
61 (reserved)
62 (reserved)
63 (reserved)
64 (reserved)
65 (reserved)
66 (reserved)
67 REG Buffer full BUFFER FULL
68 (reserved)
69 (reserved)
70 (reserved)
71 (reserved)
72 EFT ERROR EFT ERROR
73 EFT BREAK EFT BREAK
74 (reserved)
75 (reserved)
76 Closed drawer error CLOSE DRAWER
77 (reserved)
78 (reserved)
79 (reserved)
80 (reserved)
81 Enter secret code ENTR SECRET#
82 IR sending SEND
83 IR receiving RECEIVE
84 IR send success SEND OK
85 IR reserve success RECEIVE OK
86 IR communication error COM. ERROR
87 IR data format error DATA ERROR
88 IR time out error TIME OUT
89 IR (zaurus) cancel CANCEL
Amessage is 12 characters
Characters can be entered by using character keys or numeric keys.
the key entery sequence for entering one character by numeric keys
is as follows:
XXX → 00 key XXX: Character code (3 digits)
Please refer to section 3
Important Note: Change of Message text under this programming
requires installation of optional ER-01/02 RA RAM
chip and creation of File Group No. 16.
2641
Character key
XX
Message No.
No change
ST TL
– 33 –
To Next Page
Loading...
Need help?
General
