ER-A520/A530 Dealer Knowledge Book
Page 160 of 266 Specifications subject to change without notice: Revision date 10/07
Logo Text - 2614
X: : Position Code = 1 to 6
Characters : Maximum 24 per each position line
Characters can be entered by using the character keys or by character code entry. The key
sequence for entering character codes is as follows:
XXX Æ [00] key XXX: Character Code (3 digits)
MRS = See Below
(ER-A520) (ER-A530)
Note: The Logo Text programming will conform to the setting preset in SRV Job #912-D.
SHARP
PRESENTS THE
ER-A520
SHARP
IS
THE
BEST
SHARP
PRESENTS THE
ER-A530
SHARP
IS
THE
BEST
To Next Page
Loading...
