FLASH ROM
Specifications subject to change without notice: Revision date 10/07 Page 239 of 266
The ROM level of the ER-A520 and ER-A530 may be determined in either of the following ways.
(1) In SRV mode, the ROM level may be printed upon making the key entry for the Flash ROM
Test SRV job #130.
(2) In PGM2 mode, the ROM level may be printed upon making the key entry for executing the
PGM2 job #959 reading.
@
CA/AT
959
No. Description of Symptom/Modification Model Version SSP No.
1
The PLU item which is assigned
“Condiment Compulsory” is printed in RED
at the Kitchen Printer (TM-U200/U230)
Note:
This SSR also includes ERA520/530U-001
ER-A520
ER-A530
RAH1A
RAH1B
SSR
ERA520/530U-002
2
The key position is duplicated during the
Free Key Assignment of [AUTO6] and
[AUTO7] by SRV Job#950 which results in
an incorrect assignment for the [AUTO6],
[AUTO7] and [AUTO8] keys in JOB#2900.
ER-A520
ER-A530
RAH1A
RAH1B
SSR
ERA520/530U-001
Please refer to the applicable technical bulletin and/or service manual for the procedures to be
followed for entering SSR data.
IMPORTANT
SSR ERA520/530U-001 MUST be deleted prior to entering the above SSR data entry
CA/AT
130