How To Use Different Washing Programs
Quick Wash Program
1. Switch power on. 2. Select Quick Wash course
by pressing Program button.
3. Select water level by
pressing Water Level
button
4. Press Start /Pause
button.
5. Washing course ends with beeping sound. Power shuts off after 30s.
Wash/Spin Program
5. Washing course ends with beeping sound. Power shuts off after 30s.
Rinse Program
1. Switch power on.
2. Select Rinse, Spin course by
pressing Program button.
3. Select water level by
pressing Water Level
button
4. Press Start /Pause
button.
5. Washing course ends with beeping sound. Power shuts off after 30s.
1. Switch power on. 2. Select Wash/Spin course
by pressing Program
button.
3. Select water level by
pressing Water Level button.
(Water Level selection is not
available for Spin mode.)
4. Press Start /Pause
button.
10
19
1.Select water level from E.Low-Mid. This program is suitable for small load size and cleaner clothing.
2.Too much of detergent will result in residual left on clothes.
3.It is advisable to adjust dosage of detergent according to load size.
Note
柔顺剂和洗涤剂注入量不得超过虹吸帽顶部
To Next Page
Loading...
