How To Use Different Washing Programs
Standard Program
1. Switch power on.
2. Select Standard course by
pressing Program button. (For
soak, select Standard + Soak)
3. Select water level by
pressing Water Level
button
4. Press Start /Pause
button.
5. Washing course ends with beeping sound. Power shuts off after 30s.
Gentle Program
1. Switch power on.
2. Select Gentle course by
pressing Program button.
3. Select water level by
pressing Water Level
button
4. Press Start /Pause
button.
5. Washing course ends with beeping sound. Power shuts off after 30s.
Select water level from E.Low~High, suitable for soiled items like shirt and pant.
Select water level from Low~High, suitable for silk and other delicate clothing.
9 20
注意
操作部 显示部
此功能为了清洁内桶，使用桶洗净程序时，不得放入任何衣物，放入
适量清洗剂，效果更佳。
桶洗净：
TUB
CLEAN
Heavy Program
1. Switch power on.
2. Select Heavy course by pressing
Program button. (For soak, select Heavy +
Soak)
3. Press Start /Pause button.
4. Washing course ends with beeping sound. Power shuts off after 30s.
Suitable for blankets and other big and heavy clothing.
Note:
1. Water Level setting is not available for this program.
2. Automatically set to High water level.
To Next Page
Loading...
