10
Additional Functions
Preset Function
1. Switch
power on.
2. Select washing
course by pressing
Program button.
3. Select water level
by pressing Water
Level button
5. Press Start /Pause
button.
6. Preset start.
7. When display showing remaining time, preset is end. (Preset lights off, Rem lights on)
8. Washing course end with beeping sound, power shut off after 30s.
Safety Lock Function
Tub Clean Function
While washing course is operating , press Preset and Add. button
Switch power on, press "Add" button to select Tub Clean.
Press START/PAUSE button to activate tub clean function.
together until the Safety Lock lights up to activate safety lock
function. To deactivate, repeat the same step until the light goes
off.
Fuzzy Function
1. Switch power on. 2. Select Standard course by pressing
Program button.
3. Press Start/Pause button.
4. Washing course ends with beeping sound. Power shuts off after 30s.
Caution: Pressing Water Level button while washing course is operating will cancel Fuzzy Function.
4. Select preset time by
pressing Preset button
(display showing preset
time)
Sensor device detects load size and optimizes the washing condition such as water level, washing course, and
washing time. Pressing the water level button or selecting other washing course before starting a wash will cancel
Fuzzy Function. To use Fuzzy Function, please ensure there is no water or very less water in the tub.
Suitable for Standard program only. Switch on power and press Start/Pause button.
11 18
注意
注意
注意
TUB
CLEAN
To Next Page
Loading...
