Timer Operations
104
11
Adjust the resolution and or contrast
if desired, and then press the START
key.
10
Press the START key.
Transmission
(Continued from Initial procedure.)
9
Dial the receiving machine using one
of the following methods:
• Press a Rapid Key.
• Press the SPEED DIAL key and
enter a Speed Dial number (if you
enter less than 3 digits, press the
START key to complete the entry).
• Enter a full fax number with the
numeric keys.
(Example)
.
SPEED DIAL
1
RESOLUTION
Q
CONTRAST
START
START
START
all-FO4700.book Page 104 Friday, November 4, 2005 9:17 AM
To Next Page
Loading...
