Timer Operations
108
Serial Polling
(Continued from Initial procedure.)
9
Dial the machines to be polled using
one or more of the following
methods:
• Press one or more Rapid Keys.
• Enter one or more Speed Dial
numbers, pressing the SPEED
DIAL key before each number.
(If you enter less than 3 digits,
press the START key to complete
the entry.)
• Enter one or more full fax numbers
with the numeric keys, pressing the
START key after each full number.
• Press one or more Group Keys.
10
Press the START key.
(Example)
SPEED DIAL
1
SPEED DIAL
2
START
START
START
all-FO4700.book Page 108 Friday, November 4, 2005 9:17 AM
To Next Page
Loading...
