Optional Settings
147
6. Option
Settings
Setting 09: ERROR CORRECTION MODE (ECM)
Press 1 (YES) to have any distortions in a transmission due to noise
on the telephone line corrected before print-out at the receiving end.
This is only effective when the other machine has ECM as well. Press
2 (NO) to turn the function off.
Note: If the transmission or reception is taking place in Super G3
mode, ECM will operate regardless of the ECM setting.
♦ Initial setting: 1
Setting 10: AUTO COVER SHEET
Press 1 (YES) to have the fax automatically generate a cover sheet
and send it as the last page of each transmission. Press 2 (NO) to turn
the function off.
♦ Initial setting: 2
Setting 11: MEMORY SCANNING
Use this setting to have the fax reduce the size of documents wider
than 8.9" (226 mm) when it scans them into memory for transmission.
Press 1 to turn off the function or 2 to turn it on. Note that if 1 (1:1) is
selected, the document will be stored at actual size, and if the
receiving machine only uses 8.3" (210 mm) paper, the parts outside of
that width will not be printed.
♦ Initial setting: 2
Setting 12: COPY SCANNING
This setting is used to reduce copies slightly before printing to ensure
that data on the edges are not cut off. Press 1 (AUTO) for automatic
reduction, or 2 (100%) for no reduction.
♦ Initial setting: 2
all-FO4700.book Page 147 Friday, November 4, 2005 9:17 AM
To Next Page
Loading...
