Loading Printing Paper
27
1. Installation
2
Push the pressure plate down until it
locks into position.
3
Place a stack of paper in the cassette,
print side up.
• Make sure the stack of paper is not
higher than the two tabs on the
paper guide and the two metal tabs.
If it is, remove some of the paper.
4
Push the cassette back into the
machine, making sure it clicks into
place.
Attach a LETTER label here to
indicate the paper size.
all-FO4700.book Page 27 Friday, November 4, 2005 9:17 AM
To Next Page
Loading...
