Relay Request
81
5. Special
Functions
♦ Only 2-digit Speed Dial numbers for end receiving machines can be
entered in the relay group. If the receiving machine has 3-digit
Speed Dial numbers that you want to enter, ask the operator of the
relay machine to store them in a Group Key, and then enter the
Group Key in the relay group.
1
Press the RELAY key and then 2.
The display will show:
Rapid Key number 4 spaces
Speed Dial number 2 spaces
Group Key number 4 spaces (for one group)
Full number Number of digits in number
(max. of 30 per number)
2:RELAY GROUP SET
ENTER #(01-10)
2
Enter a 2-digit number from “01” to
“10”. This number identifies the relay
group.
3
Press the START key.
U
RELAY
2
(Example)
0
1
START
all-FO4700.book Page 81 Friday, November 4, 2005 9:17 AM
To Next Page
Loading...
