1 – 7
FO-71RA
FO-51RA
5
Close the operation panel, making sure it clicks into place.
• Press down on both front corners of the panel to make sure it
clicks into place.
4
Flip down the green levers on each side of the white roller.
3
Remove the paper roll.
• Remove any cut pieces of paper from the paper compartment.
(FO-71 Only)
FO-51
FO-71
Press the knob to
mark sure the front
side of the metal
guide is down.
5. Clearing jammed printing paper
1
Grasp the finger hold and pull up to open the operation panel.
2
Flip up the front paper guide.
4
Cut off the wrinkled part of the paper.
5
Reload the paper.
• Jammed paper is often caused by improper loading. Be sure to
carefully follow the instructions for paper loading given in Loading
the Thermal Paper.
To Next Page
Loading...
