EN-9
ENGLISH
1.
Turn the Main Unit power OFF.
2.
more 3 sec.
♪
Select Set
3.
Select "Function number".
Reverse Forward
or
････
Set
♪
HOW TO CH AN GE VARIOUS SETTINGS
You can change the functions in the table "Type of setting" below.
Function Setting
Light Control
You can select the brightness of the Front Display
and Cleanliness Monitor.
Turn off *
Darker
Auto
(default)
Light automatically switches ON or OFF based
on room brightness.
Room is bright : light is ON
Room is dark : light is OFF
Auto Restart
If the Main Unit is unplugged or if there is a power
failure, the Main Unit will resume operation with
the previous settings after power is restored.
Cancellation
ON
(default)
Adjusting Sensor Sensitivity (F3-F5)
Light Sensor
Low
Dust(sensitive) Sensor
Standard
(default)
Odor Sensor
High
*
When set to “Turn off”, the “Darker” light illuminates for 8 seconds after operation starts and then the light turns off.
♪
♪
4.
Select "Setting number".
Reverse Forward
or
Set
♪
5.
Press Power ON/OFF Button to
fi nish the setting.
♪
〜
Turn off
♪
♪
♪♪
【
FP-J80Y only
】
To Next Page
Loading...
Need help?
General
