FILTER INSTALLATION
To maintain the quality of the filter, it is installed in the main unit and packed in plastic
bag. Be sure to remove the filter from the plastic bag before using the unit.
1
Remove the Back Panel.
2
Remove the plastic bag from
the Filter.
3
Place the Filter within the main
unit.
Do not install the filter backwards or the
unit will not operate properly.
Upper Tabs
• Do not operate the unit without the filter.
Date Label
Pull
Push
Be sure to remove the power plug
from the wall outlet.
4
Replace the Back Panel to the
main unit.
5
Fill in the usage start date on the
Date Label.
Use the date as a guide for the filter re-
placement schedule.
To Next Page
Loading...
