Sharp FX-J80U - PRODUCT PART NAMES - SECTION 2

EN-8
1.
Connect your smart device to the
same router as the air purifi er.
2.
Tap “ ” at the upper left part of the
“Home” screen of the Sharp Air
application, and select “Already
connected with a router”.
3.
Tap “Pair” for the air purifi er you
would like to pair.
4.
Enter the air purifi er information and
tap “Save”.
• The Wi-Fi indicator of the air puri er will
blink.
* This screen will not be displayed, in case
the air puri er has been already registered
with other smart devices.
INITIAL CONNECTION SETTINGS
3
CONNECTION BETWEEN THE AIR PURIFIER AND A SMART DEVICE
5.
Press the Wi-Fi button on the air
purifi er within 3 minutes.
6.
The melody will sound, and the
Wi-Fi indicator will light up.
• If the settings cannot be completed, the
air puri er will beep 4 times, and the Wi-Fi
indicator will light up. In this case, please try
again from Step 2.
* For details of the application operating
procedure, please refer to “HELP” on the
application.
The initial settings are completed.
FX-J80U_Wi-Fi_EN.indd 8 2019/10/25 14:10:31