E-10
AUX / OPTICAL / COAXIAL / HDMI / HDMI ARC operation
Bluetooth operation
1. Ensure that the unit is connected to the TV or
audio device.
2. Press the button repeatedly on the unit or
the / HDMI buttons on the remote control to
select the AUX, OPTICAL, COAXIAL, HDMI 1,
HDMI 2, HDMI ARC mode.
3. Operate your audio device directly for playback
features.
4. Press the VOL +/– button to adjust the volume to
your desired level.
Notes:
● The unit may not be able to decode all digital
audio formats from the input source. In this case,
the unit will mute. This is NOT a defect. Ensure
that the audio setting of the input source (e.g.
TV, game console, DVD player, etc.) is set to
PCM or Dolby Digital (Refer to the user manual
of the input source device for its audio setting
details) with HDMI 1 /HDMI 2 / HDMI ARC /
OPTICAL / COAXIAL input.
● When the DOLBY DIGITAL audio format is
entered, the sound bar display shows DOLBY
AUDIO.
● When the PCM audio format is entered, the
sound bar display shows PCM AUDIO.
● When entering non-PCM or DOLBY DIGITAL
audio formats, if there is no sound output from
the unit and the display show NO SUPPORT.
Pair Bluetooth-enabled Devices
The first time you connect your bluetooth device to
this unit, you need to pair your device to it.
Notes:
● The operational range between this unit and
a Bluetooth device is approximately 8 meters
(without any object between the Bluetooth
device and the unit).
● Before you connect a Bluetooth device to this
unit, ensure you know the device’s capabilities.
● Compatibility with all Bluetooth devices is not
guaranteed.
● Any obstacle between this unit and a Bluetooth
device can reduce the operational range.
● If the signal strength is weak, your Bluetooth
receiver may disconnect, but it will re-enter
pairing mode automatically.
To disconnect the Bluetooth function, you can:
● Switch to another function on the unit.
● Disable the function from your Bluetooth device.
The Bluetooth device will be disconnected from
the unit after the “Disconnected” voice prompt.
● Press and hold the button on the remote
control or button on the unit.
TIPS:
● Enter “0000” for the password if necessary.
● If no other Bluetooth device pairs with this unit
within two minutes, it will recover its previous
connection.
● The unit will also be disconnected when your
device is moved beyond the operational range.
● If you want to reconnect your device to this unit,
place it within the operational range.
● If the device is moved beyond the operational
range, when it is brought back, please check if
the device is still connected to the unit.
● If the connection is lost, follow the instructions
above to pair your device to the unit again.
1. During ON mode, press the button
repeatedly on the unit or the button on the
remote control to select Bluetooth mode. “NO
BT” will show on the display if the unit is not
paired to any Bluetooth device.
2. Activate your Bluetooth device and select the
search mode. “HT-SBW460” will appear on your
Bluetooth device list.
● If you cannot find the unit, press and
hold the button on the remote control
or button on the unit to be searchable.
The display will show “PAIR” and you will hear
“Pairing” from the unit.
3. Select “HT-SBW460” in the pairing list. After
successful pairing, you will hear “Paired” from
the unit, and the display panel shows “BT”.
4. Play music from the connected Bluetooth device.
HT-SBW460 asean.indd 10 20/2/2020 11:42:18 AM
10
To Next Page
Loading...
Need help?
General
Weight and Dimensions
