Sharp HT-SBW460 User Manual

E-5
1. Open the battery cover.
2. Insert the batteries according to the terminal
indicated in the battery compartment. When
inserting or removing the batteries, push it
toward the (–) battery terminals.
3. Close the cover.
Notes concerning use:
● Replace the batteries if the operating distance
is reduced or if the operation becomes erratic.
Purchase 2 “AAA” size batteries (UM/SUM4,
R3, HP-16 or similar).
● Periodically clean the transmitter on the remote
control and the sensor on the unit with a soft
cloth.
● Exposing the sensor on the unit to strong light
may interfere with operation. Change the lighting
or the direction of the unit.
● Keep the remote control away from moisture,
heat, shock, and vibrations.
Caution:
● Replace all old batteries with new ones at the
same time.
● Do not mix old and new batteries.
● Remove the batteries if the unit will not be
used for a long period of time. This will prevent
potential damage due to battery leakage.
● Do not use rechargeable batteries (nickel-
cadmium battery, etc.).
● Installing the batteries incorrectly may cause the
unit to malfunction.
● Batteries (battery pack or batteries installed)
shall not be exposed to excessive heat such as
sunshine, fire or the like.
The remote control can be used within the range
shown below:
Remote control
Battery installation
Test of the remote control
Remote sensor
0.2 m - 6 m
HT-SBW460 asean.indd 5 20/2/2020 11:42:15 AM

Sharp HT-SBW460 Specifications

General

Audio decoders	Dolby Atmos, Dolby Digital, Dolby Digital Plus, Dolby TrueHD
RMS rated power	440 W
Audio output channels	3.1 channels
Audio Return Channel (ARC)	Yes
Wi-Fi	No
Bluetooth version	4.2
HDMI ports quantity	3
Connectivity technology	Wired & Wireless
Digital audio coaxial in	1
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Soundbar power consumption	25 W
Power consumption (standby)	0.5 W
Subwoofer power consumption	20 W
Soundbar speaker RMS power	100 W
Subwoofer connectivity	Wireless
Subwoofer frequency range	50 - 130 Hz
Display type	LED
Product color	Metallic
Package type	Box
Package depth	273 mm
Package width	1023 mm
Package height	395 mm
Package weight	10300 g
Cables included	AC, AUX, HDMI
Soundbar frequency range	120 - 20000 Hz
Remote control battery type	AAA
Number of remote control batteries	2
Master (outer) case width	1040 mm
Master (outer) case height	535 mm
Master (outer) case length	285 mm
Master (outer) case weight	22800 g
Quantity per master (outer) case	2 pc(s)
Master (outer) case GTIN (EAN/UPC)	8586018085502

Weight and Dimensions

Depth	105 mm
Width	950 mm
Height	70 mm
Soundbar weight	2500 g
Subwoofer width	240 mm
Subwoofer height	415 mm
Subwoofer weight	5400 g