Sharp KC-G40L User Manual

E-7
PREPARATION
1
2
3
4
Remove the Back Panel.
Remove the plastic bag
from the each lter.
Install the lters in the correct order as
shown.
Install the Back Panel.
OPERATION
START STOP
The fan speed is automatically controlled depending on the
5 detection. (PM2.5 / Usual dust / Temperature /Humidity /
Light)
Operates at HIGH fan speed for 60 minutes and then
alternates between Low and High level for 20 minutes each.
10 minutes: Max High fan level
50 minutes: High fan level
20 minutes: Low fan level
20 minutes: High fan level
• The Plasmacluster Ion can not be turned “OFF”. (Ref.E-9)
NOTE
2
1
3
3
Back Panel
HEPA Filter
Deodorizing Filter
The fan speed is automatically controlled depending on the 7
detection. (Ref.E-1)
Click
Deodorizing Filter
HEPA Filter
Tag
• Front Display, Cleanliness Monitor and Air Outlet LED
automatically switch ON and OFF based on room
brightness. (When light control is set to "Auto". Ref.E-10)
NOTE
NOTE
• When replacing the lter, making a memo of the start of
use date is recommended.
START/STOP
HAZE MODE
AUTO MODE
(KC-G40)
INTELLIGENT MODE
(KC-G60 / KC-G50)
FILTER INSTALLATION
Always be sure to remove the
power plug from the wall outlet.

Sharp KC-G40L Specifications

General

Brand	Sharp
Model	KC-G40L
Category	Air Cleaner
Language	English