Sharp KC-JG20A User Manual

ENGLISH
1
2
E-12
E-13
CONVENIENT FUNCTIONS
Lights Control
Press the Button when the monitor or Plasmacluster Ion Indicator Light is too bright
Beep
Beep
Beep
Beep
(In operation) (In operation)
Off
Adjustment of Sensor Detection Sensitivity
(When the unit is OFF)
(When the unit is OFF)
(When the unit is OFF)
Dust Monitor
does not change from "Red"
(frequently becomes "Red")
(frequently becomes "Green")
does not change from "Green"
…… adjust it to "Low"
…… adjust it to "High"
Auto Restart
If you want to restart the operation automatically when the power is recovered from electric power failure
• When it is "OFF":
The Plasmacluster
Indicator Light (blue)
goes out.
Child Lock
When you want to prevent mishandling by children.
Setting/Canceling
Press for at least
3 seconds
Press for at least
3 seconds
“Set”
“Cancel”
• If you set the child lock, the operation other
than cancellation of child lock is disabled.
If the main unit is unplugged, the setting is
released.
(While auto restart is set, the child lock is
not cancelled even if the main unit is
unplugged.)
E-13
page
Press for at least
3 seconds
Press for at least
3 seconds
Press for at least
3 seconds
Beep
Beep
Beep,
Beep
"LOW", "MED", and "MAX" Lights
are lighting for 10 seconds
• Even if the main unit unplugged or the
breaker cuts off during operation, the
operation is restarted with previous
operation mode and setting after power
recovery.
Setting
(In operation)
Plasmacluster Ion
Indicator Light
Front Monitor
• Press the Button to change settings as follows:
Bright
Dim
Off
Caution
• When the light is set to “OFF”, the Humidifying Indicator Light starts blinking once water needs
to be filled.
• When the light is set to “OFF”, it operates in "Dim" mode if the unit is restarted.
Plasmacluster Ion ( ) ON/OFF
Press the Button to turn ON or OFF the Plasmacluster Ion function
ON/OFF
“ON” “OFF”
Beep,
Beep
Beep
Beep,
Beep
Beep
(In 8 seconds)
select the
preferred sensor
detection
sensitivity
Beep
Beepー
Completed
Setting Canceling
• Fan Speed Indicator Light indicates the
current sensor detection sensitivity.
(“Standard” by default)
• Press the Button to change settings as
follows:
• Adjustment automatically finishes if the
Power OFF button is pressed in 8 seconds.
• The sensor detection sensitivity setting
will be saved even if the unit is
unplugged.
・Household dust (dust, dust mite feces and dead mites, mold spores, pollens), cigarette smoke etc.
Sensors detect:
“LOW”
“Standard”
“HIGH”
Beep
Beep,
Beep
KC-JG20A(単ページ).indd 15 2016/10/12 10:17:40

Sharp KC-JG20A Specifications

General

Brand	Sharp
Model	KC-JG20A
Category	Air Cleaner
Language	English