If the door is on the left.
If the door is on the right.
Hinge Hinge
Hinge Hinge
Change the direction of the door
Installing Clothes Dryer
09
1. Remove the door by unscrewing the 2
screws with a cross screwdriver.
2. Unscrew 5 screws with a crosshead
screwdriver and separate the mounting
brackets (A) and (B) at the left and right of
the clothes dryer door.
3. Switch door hinge, part (B) and part (A)
and tighten 5 screws with a cross screw-
driver.
4. Remove the four screws in the door
lock position, remove the door lock and
install to the other side.
5. Fit door on the other side and screw
down with 2 screws.
To Next Page
Loading...
