Cooling air inlet cleaning
Humidity sensor
Door Cleaning
• Do not remove rubber from the door.
20
In order to reduce drying time and save energy, please clean up before and after use.
Clean heat exchanger
Maintenance of clothes dryer
• The surface of the heat exchanger is sharp, do not clean directly by hand.
Please wear protective gloves.
• Exerting pressure on the heat exchanger causes the fins to deform.
• Please do not sprinkle water directly to clean up.
1. If dust accumulates at the air inlet on the front of the
product, clean with a wet cloth.
• Dust accumulates and flows into the product, which
may cause in abnormal operation or fire, so please
clean it up in time.
1. Clean the sensor surface with a soft cloth.
• To ensure good use effect, periodically clean the
sensor surfaces on time.
• Dust buildup on the sensor interferes with the opera-
tion of drying, resulting in increased drying time.
1. Dust or fluff may accumulate inside the door. Please
clean with a soft cloth and brush.
To Next Page
Loading...
