EN-9
ENGLISH
PREPARATION
FILTER INSTALLATION
1.
Remove the
Back Panel.
Back Panel
2.
Take out the filters from the plastic
bag.
HEPA Filter
Deodorizing
Filter
(Only KI-N50)
3.
Install the filters in the correct order
as shown.
HEPA Filter
Deodorizing Filter
Tag
4.
Install the Back
Panel.
Click
Click
NOTE
• It is recommended that you note down the
date when the filters were replaced for future
reference.
• Do not operate the product without the filters.
• To maintain the quality of the filter, it is installed in the product and packaged in a plastic
bag.
• Be sure to stop operation and unplug the product before filter installation or replacement.
REFILLING THE WATER
TANK
1.
Remove the Water Tank.
Tank Handle
Water Tank
2.
Fill the Water Tank with the tap water.
満水
FULL
Tank Cap
3.
To prevent leaks,
securely tighten the
Tank Cap.
4.
Install the Water
Tank.
Click
To Next Page
Loading...
