Sharp KI-N40 - Wi-Fi FUNCTIONS (A1-A8)

EN-16
Function Setting
Wi-Fi adapter
ON/OFF
1.
Select “ ” by following Steps 1 - 3 on page 14.
2.
Press "
SHARP COCORO AIR
" Button to select Setting " " or
"
".
Wi-Fi OFF
Wi-Fi ON
♪
3.
Complete
NOTE
• When Setting number (“ ” or “ ”) is
changed, the square rotates on the display
until the setting is completed. When setting is
completed, “
” is displayed.
♪
〜
Wi-Fi connection
with a router
(with the WPS
Button)
1.
Select “ ” by following Steps 1 - 3 on page 14.
2.
After “ ” is displayed, press the WPS (Wi-Fi Protected Setup)
Button of the router.
Light up
weak strong
Blink
Blink
Once connected, WKHreceiver
level will be displayed.
A connection error is occuring if “ ” is displayed. Please confirm that the
router is operating correctly and try again.
3.
Complete
♪
Initialization of
Wi-Fi function
1.
Select “ ” by following Steps 1 - 3 on page 14.
2.
After “ ” is displayed press “Mode” Button.
An error is occurring if “ ” is displayed. Please try again.
♪
〜
Complete
Blink
Initializing
♪
3.
Complete
NOTE
• Please delete the device registration from the App
when initializing the air purifier which is already
connected to the Wi-Fi.
♪
Wi-Fi FUNCTIONS (A1-A8)