28
LC-26DA5U
LC-32DA5U
2-7. Menu list in process A mode
Page Line Item
1 MainVersion Main software version
Dev Version Device version
CPLDVersion CPLD version
NORMAL STANBY CAUSE Reasons of standby at normal time
ERROR STANBY CAUSE Reasons of standby in the event of error
2 INDUSTRY INIT(+Cause) Initialization to factory settings (including clearing Standby Cause data)
INDUSTRY INIT Initialization to factory settings
HOTEL MODE Activate/deactivate the hotel mode
Center Acutime Main microcomputer operating time
RESET Reset main microcomputer operating time
Backlight Acutime Backlight lighting time
RESET Reset backlight lighting time
Picture Read Pos X x-coordinate for reading image data
Picture Read Pos Y y-coordinate for reading image data
Picture Read Color Specification of color for reading image data
Picture Read SignalType Specification of signal for reading image data
Picture Read On/Off of image data read operation
3 N358+TUNER ADJ Auto adjustment of NTSC and TUNER signals
N358 ADJ Auto adjustment of NTSC signal
TUNER ADJ Auto adjustment of TUNER
CONTRAST N358 NTSC contrast adjustment
TUNER A DAC TUNER DAC adjustment
4 TUNER TEST(7ch) Execute TUNER TEST
TUNER TEST(10ch)
TUNER TEST(15ch)
TUNER TEST(69ch)
TEMP Temperature sensor and OPC AD value indications
5 COMP15K ADJ Auto adjustment of component 15k
COMP15K CONTRAST Component 15k contrast adjustment
6 HDTV ADJ HDTV auto adjustment
HDTV CONTRAST HDTV contrast adjustment
HDTV CB GAIN HDTV CB gain adjustment
HDTV CR GAIN HDTV CR gain adjustment
HDTV Y OFFSET HDTV Y offset adjustment
HDTV CB OFFSET HDTV CB offset adjustment
HDTV CR OFFSET HDTV CR offset adjustment
7 HDMI ADJ HDMI auto adjustment
HDMI CONTRAST HDMI contrast adjustment
To Next Page
Loading...
Need help?
General