31
LC-26DA5U
LC-32DA5U
18 OPC AD LEVEL 0 OPC 0 AD level setting
OPC AD LEVEL 1 OPC 1 AD level setting
OPC AD LEVEL 2 OPC 2 AD level setting
OPC AD LEVEL 3 OPC 3 AD level setting
OPC AD LEVEL 4 OPC 4 AD level setting
OPC AD LEVEL 5 OPC 5 AD level setting
OPC AD LEVEL 6 OPC 6 AD level setting
OPC AD LEVEL 7 OPC 7 AD level setting
19 OPC AD LEVEL 8 OPC 8 AD level setting
OPC AD LEVEL 9 OPC 9 AD level setting
OPC AD LEVEL 10 OPC 10 AD level setting
OPC AD LEVEL 11 OPC 11 AD level setting
OPC AD LEVEL 12 OPC 12 AD level setting
OPC AD LEVEL 13 OPC 13 AD level setting
OPC AD LEVEL 14 OPC 14 AD level setting
OPC AD LEVEL 15 OPC 15 AD level setting
Page Line Item
2-8. Code list for Standby Cause
Code Indication Description
1 RC_STNBY /* Standby set by remote control */
2 E_CCKMVT /* Abnormal voltage of CCKM line detected */
5 OUT_OF_R /* While a PC display is on, unspecified input continued long time. */
6 NO_OPERT /* Off caused by no operation */
7NO_SIGNA /* Off caused by no signal */
8 PC_MODE1 /* Set by the PC power management mode 1 */
9 PC_MODE2 /* Set by the PC power management mode 2 */
A SLEEP_TM /* Set by off timer */
B E_NOMONI /* Incompatible monitor is connected to the AVC center. */
C OFF_232C /* Set by the command from RS232C */
E AVC_TACT /* Set by the front switch at the AVC center */
F BSBOOKED /* The pre-set time has passed since TV was turned on from standby by the BS timer. */
10 E_AVCFAN /* Fan failure at the AVC center */
11 E_BSSUBM /* Communication failure with the BS sub microcomputer (Not used) */
12 E_CVICIC /* CVIC failure */
13 E_AVCTMP /* Abnormal temperature at the AVC center */
14 E_1BITAU /* 1Bit-AMP failure */
15 E_MONIPW /* Monitor main power failure detected */
16 E_MONITR /* Monitor problem detected */
17 E_FNLOCK /* Fan lock for North America */
40 /* Failure in Digital Standby */
To Next Page
Loading...
Need help?
General