Sharp LC-26DV20U - 26" LCD TV

Watching TV
Language setting
When you press TV MENU for the first time, the
LANGUAGE setup menu will appear
automatically.
Select from among 3 languages: English, French and
Spanish.
Press "_/_ to select the desired language
from the list.
SETUP
CLOCKSET
AIR/CABLE CABLE
AUTO CH MEMORY
ADDJDELETE
L_):SELECT ;_):ADJUST
Clock setting
Please set correct date and time manually.
Press A/Y to select "CLOCK SET", then
press "_/_. The CLOCK SET menu screen
displays.
CLOCKSET
DAY I (BUR}
YEAR 2D06
TIME 12:DDAM
=_I:SELECT ¢_I:ADJUST
EXIT:END
Press 4/_ to set the MONTH, then press
V to move to the next.
Set the DAY, YEAR and TIME (hour and
minute) as above step.
After setting the date and time correctly,
press ENTER.
Antenna setting
Make sure what kind of connection is made with your
TV/DVD when selecting "AIR" or "CABLE".
Channel search
AUTO CHANNEL MEMORY makes the TV/DVD look
for all channels viewable in the set area.
Press A/Y to select "AUTO CH MEMORY"
SETUP
LANGUAGE ENGLISH
CLOCKSET
AIRJCABLE CABLE
ADD/DELETE
V
_):SELECT I_):ADJUST
Press 4/_. The TV/DVD will begin
memorizing all the channels available in
your area.
AUTO OHMEMORY
EXIT:CANCEL
PROGRAMMINGNOW
PLEASEWAIT
• Depending on the reception condition, it may take
approximately 10 minutes to complete memorizing
digital cable channels, please be patient,
Skipping stored channel
You can set channel selection disabled using CN/,,Iv.
Press TV MENU and the MENU screen
displays.
Press 4/_ to select _ (SETUP).
Press A/Y to select "ADD/DELETE", and
then press 4/_.
Press A/Y to select "ADD/DELETE", and
then press 4/1_. Now, the channel list
becomes selectable.
Press A/V to select "AIR/CABLE", then
press 4/_ to select "AIR" or "CABLE".
Press A/Y to select the channel which you
want to skip.
SETUP
LANGUAGE ENGLISH
CLOCKSET
AUTO CH MEMORY
ADD/DELETE
V
L_:SELECT L_qADJUST
Press _/_ to select "DELETE" for selected
channel.
Press EXIT to return to the normal screen.
Now, skipping channel is applied.
• To add a digital channel you are watching:
Select a channel you want to add. Then select "ADDING
CHANNEL" in step 4, press 4/_'.
• To release the skipping channel:
Select "ADD" in step 6.
• To remove all the channels from channel memory:
Select "CLEAR ALL" after step 3, and the press 4/_'.
Q"17