Watching TV
Changing the volume
You can change the volume on the TV/DVD or on the
remote control unit.
Press DISPLAY to display the current channel (or
input source) information on the screen.
When the TV/DVD receives a digital signal, press
once, the digital information will appear.
• Broadcast program name
• Station name • Remaining time
• Audio language • Program name
• V-CHIP RATING • HD or SD mark
• Closed Caption mark • V-Chip mark
Using VOL +/-
* To increase the volume, press VOL+.
* To decrease the volume, press VOL-.
VOLUME 25
1
• VOL+/- on the TV/DVD operates the same as VOL+/- on
the remote control unit.
Press DISPLAY again, the analog information will appear.
Clock
Channel number or VIDEO mode selected
Channel label (if preset)
Stereo or SAP (second audio program) audio status
Content rating
View mode
Using MUTE on the remote control unit
Mutes the current sound output.
®@@
@@@
A®®8
(9@@
5
Press MUTE.
• "MUTE" will be displayed on the screen, and
the sound is silenced.
STEREO
SAP
TV-PG L V
SLEEP TIMER 2hOOm
TV
ABCD
SIDE BAR CABLE
CLOCK 12:00AM SUN 7
Press DISPLAY again to clear the display.
• Analog channel status will display on the screen for approx.
4 seconds. Digital channel status will display for approx.
10 seconds.
• Mute can be canceled if you press VOL+/- or MUTE.
(_=19
To Next Page
Loading...
