Watching the DVD
Simple operations for watching a DVD.
_PLAY mSTOP I_SKIP_ dEJECT
00000
VOL + v Cll A
CZD E3Z3
IN[_UT POWER
POWER
1
od
i
J
POWER indicator
TV/DVD status indicator (POWER)
ON Lighting (Green)
OFF/Standby Lighting (Red)
Perform the following steps before you press POWER
on the remote control unit.
1. Insert the batteries into the remote control unit.
(See page 10.)
2. Connect the antenna cable to the TV/DVD. (See
page 15.)
3. Plug in the AC cord to the AC outlet. (See page
9.)
Press POWER on the TV/DVD, or POWER on the
remote control.
• POWER indicator (Green): The TV/DVD is on. ("PLEASE
WAIT" will appear for a few seconds on the screen.)
Press TV/DVD to select the DVD mode.
Press POWER on the TV/DVD, or POWER on the
remote control.
• The TV/DVD enters standby mode and the image on the
screen disappears.
• The POWER indicator on the TV/DVD changes to Red.
POWER (On/Standby)
TV/DVD
)OWER
TV/DVD EJECT
SLEEP VIEWMODE INPUT
C3 CD CD
®®®8
®®®
®@©
Q
SKIP REV FWD SKIP
STILL/PAUSE PLAY STOP
CSD
SETUP/TVMENU DVD MENU
• If you are not going to use this TV/DVD for a long period
of time, be sure to remove the AC cord from the power
outlet.
• Weak electric power is still consumed even when
POWER is turned off.
• If a station being viewed stops broadcasting, the TV/DVD
will automatically shut itself off after 15 minutes. (TV
mode only.)
(_)= 40
To Next Page
Loading...
Need help?
General
