Sharp LC-26DV20U - 26" LCD TV

Useful adjustment settings
Allows you to use a password to protect certain
settings from being accidentally changed.
IMPORTANT:
Three conditions must be met to enable the V-Chip
O Password is registered.
® V-CHIP settings have been made.
® "V-CHIP" is set to "ON".
Setting a password
Press TV MENU and the MENU screen
displays.
Press "_/1_ to select _ (LOCKS).
Press A/Y. The password entering menu
displays.
Select and enter a password (4 digits) using
the number buttons (0-9}, then press
ENTER.
LOCKS
[D-S]:SELECT ENTER:SET
EXIT:END
"appears instead of the number.
Enter the same password again to confirm,
then press ENTER, the password is now
registered and the LOCKS menu will appear
on the screen.
LOCKS
[S-S]:SELECT ENTER:SET
EXIT:END
Changing the password
Allows you to change your current password.
Repeat steps 1 to 3 in setting a password,
* The password entering menu displays.
Input the 4-digit password by using 0-9,
then press ENTER.
Press A/V to select "NEW PASSWORD",
then press "_/I_.
LOCKS
V=CNIP OFF
V-CHIPSET F
(_I:SELECT _l :ADJUST
Enter a new password using 0-9, then
)ress ENTER.
LOCKS
[O-S]:SELECT ENTER:SET
EXIT:END
Enter the same password again to confirm,
then press ENTER.
LOCKS
[O-S]:SELECT ENTER:SET
EXIT:END
The screen returns to LOCKS menu. Your
new password has been set.
* As a precautionary measure, make a note of your
password and keep it in a familiar place.
* The "V-CHIP SET (DTV)" will only be selectable when
a new rating system can be downloaded via digital
broadcasting in the U.S.
(_)- 34