QUICK REFERENCE
STOP! To safely remove the TV/DVD from the box
It's best to use 2 people to remove the television for stability.
1. Use the cardboard holders on either side of the television to remove it from the box.
2. Remove the cardboard; however, keep the wrapping on the television to protect it while moving.
3. Lift onto installation location as the diagram illustrates.
Ventilation & Cleaning Tips i_ _'" i'
KeepyourTV/DVDinawellventilatedareaandmakesurenottoplaceitbyaheatsource _- _q_
or use near water. The TV/DVD is designed for AC use only and should be used with supplied ,< ®
----_ ,_
AC cord.
\ \ I //
Clean the screen by spraying a soft lint free cloth with water to lightly moisten. Gently wipe
and avoid pressing on the screen. To clean the outer cabinet, use the same method. Do not
use liquid or aerosol cleaners.
The screen is glass and can be scratched or broken when dropped or impacted.
QUICK iNSTALLATiON TiPS
1, Attach your antenna to the back of the TV/DVD.
(See page 15.)
4. How to turn on the TV/DVD for the first time.
A) Press POWER on TV/DVD.
Connect the AC plug for the TV/DVD into the wall
outlet.
b'pLAY =STOP _SKIP_ &EJECT
00000
VOg + V CH /_ INPUT POWER
__ o_
POWER
'/; _ IAC outlet]
Place the TV/DVD close to the AC outlet, and keep the
power plug within reach.
B) POWER indicator on the front of the TV/DVD lights
GREEN.
1
©
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT
TOUCH UN-INSULATED PARTS OF ANY CABLES
WITH THE AC CORD CONNECTED.
3. Bundle the cords properly with a cable clamp.
POWER indicator
• Speaker cannot be detached from the TV/DVD.
• TV/DVD angle cannot be adjusted.
Q-9
To Next Page
Loading...
