18
AUDIO
MTS STR/SAP/MONO
BASS 25
TREBLE 25
BALANCE 0
SPEAKERS ON
SURROUND OFF
:SELECT :ADJUST
►
AUDIO
MTS STEREO
BASS 25
TREBLE 25
BALANCE 0
SPEAKERS ON
SURROUND ON/OFF
:SELECT :ADJUST
►
Setting MTS/SAP stereo mode
The TV has a feature that allows reception of sound
other than the main audio for the program. This
feature is called Multi-channel Television Sound
(MTS). The TV with MTS can receive mono sound,
stereo sound and Secondary Audio Programs (SAP).
The SAP feature allows a TV station to broadcast
other information, which could be audio in another
language or something completely different like
weather information.
You can enjoy Hi-Fi stereo sound or SAP
broadcasts where available.
• Stereo broadcasts
View programs like live sporting events, shows and
concerts in dynamic stereo sound.
• SAP broadcasts
Receive TV broadcasts in either MAIN or SAP sound.
MAIN sound: The normal program soundtrack (either in
mono or stereo).
SAP sound: Listen to a second language, supplementary
commentary or other information. (SAP is mono sound.)
If stereo sound is difficult to hear.
• Obtain a clearer sound by manually switching to fixed
mono-sound mode.
NOTE
• MTS only operates while in TV mode.
•
MTS is available only when receiving analog broadcasting,
not when receiving digital broadcasting.
• When the TV receives a stereo or SAP broadcast, the
word “STEREO” or “SAP” displays on-screen if you press
DISPLAY.
Watching TV
Press AUDIO and the (AUDIO) menu
screen displays. “MTS” will be highlighted.
Press EXIT to return to the normal screen.
Press AUDIO again or ϵ/϶ to select “STR
(STEREO)”, “SAP” or “MONO”.
1
2
3
Setting surround sound
The surround sound feature expands the audio
listening field wider and deeper to create exception
sound quality from the TV’s speakers.
Select STEREO mode (see “Setting MTS/
SAP stereo mode”).
Press SURROUND and the
(AUDIO)
menu screen displays. “SURROUND” will be
highlighted.
1
2
Press ϵ/϶ to select the “ON” or “OFF”.
3
After your desired setting, press EXIT to
return to the normal screen.
4
NOTE
• You can enter to the same menu screen from (AUDIO)
menu.
Changing MTS
You can change MTS as shown below to match the
television broadcast signal.
Display the channel information
Press DISPLAY to display the current channel (or
input source) information on the screen.
• Channel number or VIDEO mode selected
• Station name
• Broadcast program name
• Remaining time
• V-Chip/RRT rating*
• Clock
• (Audio language)
• (V-Chip mark)
• Stereo or SAP (second audio program) audio status
• View mode
* Display of RRT rating is given priority.
To Next Page
Loading...
Need help?
General