32
Input the 4-digit password by using 0–9,
then press ENTER.
The LOCKS menu displays.
Press ϵ/϶ to select
(LOCKS).
Press ϳ/ϴ. The password entering menu
displays.
Press ϳ/ϴ to select “CAN ENG RATING”.
Then press ϵ/϶ to select the desired rating.
• See page 31 for setting details.
Press MENU and the MENU screen
displays.
V-CHIP SET
TV RATING OFF
MOVIE RATING
CAN ENG RATING OFF
CAN FRE RATING OFF
OFF/E/G/8ans+/13ans+
16ans+/18ans+
:SELECT :ADJUST
Press EXIT to return to the normal screen.
• See page 31 for setting details.
Repeat steps 1 to 5 in Canadian English
ratings.
Press ϳ/ϴ to select “CAN FRE RATING”.
Then press ϵ/϶ to select the desired rating.
LOCKS
V-CHIP ON/OFF
V-CHIP SET
V-CHIP SET (DTV)
NEW PASSWORD
:SELECT :ADJUST
Press EXIT to return to the normal screen.
Press RETURN. The LOCKS menu
displays.
Press ϳ/ϴ to select “V-CHIP”, then press
ϵ/϶ to select “ON”.
Your setting are now set into memory.
• If “V-CHIP” is not set to “ON”, the V-CHIP
setting will not work.
Press ϳ/ϴ to select “V-CHIP SET”, then
press ϵ/϶. The V-CHIP SET menu displays.
V-CHIP SET
TV RATING OFF
MOVIE RATING
CAN ENG RATING OFF
OFF/E/C/C8+/G/PG/14+/18+
CAN FRE RATING OFF
:SELECT :ADJUST
How to temporarily release the
V-CHIP block
The V-CHIP block is working and censors a
broadcast, “THIS PROGRAM HAS BEEN BLOCKED!”
displays.
Reactivating the temporarily released
V-CHIP block
You can reactivate the temporarily released V-CHIP
block as shown below.
Method 1:
Change to the other channel.
Method 2:
Switch off the TV power.
NOTE
• Performing any of the two above will activate the V-CHIP
block.
Press MUTE while the V-CHIP is working
and then the password entering menu
displays.
Enter your 4-digit password with 0–9, then
press ENTER.
At this time V-CHIP block temporarily
releases.
Canadian English ratings Canadian French ratings
1
2
3
4
5
6
7
8
9
1
2
3
1
2
Useful adjustment settings
To Next Page
Loading...
