Sharp LC-32AV22U User Manual

6
Short screws (
X
4)
(used in step 2)
Long screws (
X
4)
(used in step 3)
Supplied accessories
NOTE
Always use the AC cord supplied with the TV.•
Make sure the following accessories are provided with the product.
Before attaching (or detaching) the stand, unplug the AC cord from the AC input terminal.
Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.
•
•
QUICK REFERENCE
Attaching the stand
1
Confirm the 8 screws supplied with the TV.
2
NOTE
• To detach the stand, perform the step in reverse order.
3
Hex key
Screw
Soft cushion
LC-32AV22U
LIQUID CRYSTAL TELEVISION
TÉLÉVISEUR ACL
TELEVISOR CON PANTALLA
DE CRISTAL LÍQUIDO
OPERATION MANUAL
MODE D’EMPLOI
MANUAL DE OPERACIÓN
ENGLISHFRANÇAISESPAÑOL
Remote control
unit (X1)
Page 8
“AA” size battery
(X2)
Page 8
AC cord
(X1)
Page 7
Cable Clamp
(X1)
Page 7
Cloth
(X1)
Page 7
Stand unit
(X1)
Page 6
Operation
manual (X1)
CAUTION
Attach the stand in the correct direction.
Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
•
•
4
For protection, sheets are covering the product.
Please remove these sheets before use.
1
Insert the stand into the openings on the
bottom of the TV.
2
Insert and tighten the 4 screws into the 4 holes
on the rear of the TV.
Remove the covering sheet of the stand.
1
Set the post for the stand unit onto the box.
2
Attach the base to the post.
3
Attach the base to the 4 screws into the 4
holes on the bottom of the base.
Hex key
Screw

Sharp LC-32AV22U Specifications

General

Brand	Sharp
Model	LC-32AV22U
Category	LCD TV
Language	English