To Next PageTo Next Page
Need help?Do you have a question about the Sharp LC-32AD5E-BK and is the answer not in the manual?
Key information and advice regarding ordering replacement parts.
Description of functions configurable via the Hotel Mode feature.
Step-by-step instructions for enabling and disabling the Hotel Mode.
Precautions and guidelines for using lead-free solder during servicing.
Method to cancel the parental control password on the TV.
Covers TV system, tuning, power consumption, and safety regulations.
Details on remote control format, custom codes, and key functions.
Specifications for Scart, HDMI, Component inputs and list of included accessories.
Information on physical dimensions, weight, materials, and environmental compliance.
Steps for removing the back cabinet, operation PCB, remocon PCB, and LCD block.
Instructions for removing digital, main, and power PCBs.
Procedure for removing the angle LCD top and bottom components.
Steps for desoldering and removing a flat package IC from the PCB.
Steps for soldering and securing a new flat package IC onto the PCB.
Steps for replacing the EEPROM IC, including data input and initialization.
Identification and purpose of specialized tools and jigs for TV repair.
Procedure for installing LPT drivers and software for update tools.
Steps to connect the PC, serial communication jig, and UART connector.
Setting the COM port and other parameters in the port settings window.
Choosing the software file from the DTV ROM disc for the update process.
Procedure for performing the firmware update, including unplugging/plugging AC cord and checking version.
Steps to prepare for VCTP software update, including LPT preferences.
Procedure for updating bootloader version, erasing flash, and loading new firmware.
Steps to set standby mode and connect the MICON program jig for EEPROM update.
Choosing the EEPROM data file (TEXT file) for writing.
Procedures for adjusting OSD position and white balance parameters.
Steps for contrast adjustment and confirmation of fixed values for various inputs.
Wiring diagram showing locations of parts relevant to electrical adjustments.
Flowcharts for troubleshooting power-on, picture display (analog/digital), and color issues.
Flowcharts for resolving on-screen display absence and vertical/horizontal line problems.
Block diagram showing signal flow for tuner, SCART, and RCA audio outputs.
Block diagram illustrating the power supply and regulator circuits.
Block diagram detailing the scaler and sub micon signal paths.
Block diagram showing connections for HDMI and D-SUB inputs.
Block diagram for sound amplifier, headphone jack, and component connections.
Block diagram of the digital processing unit, including tuner and MPEG components.
Block diagrams illustrating the power PCB circuitry.
Collection of schematic diagrams for various interfaces and PCBs.
Top and bottom side layouts of the main printed circuit board.
Layouts for power, operation, and remote control PCBs (soldered and chip sides).
Top and bottom side layouts of the digital printed circuit board.
Oscilloscope measurements for 21-pin, AV Jack/Switch, and Mixer interface signals.
Waveforms for sound amplifier, headphone amp, scaler, and micon circuits.
Oscilloscope waveforms for signals associated with the HDMI interface IC.
List of replacement diodes, ICs, and transistors with part numbers and types.
List of replacement coils, capacitors, resistors, and core beads.
List of replacement connectors, jacks, fuses, relays, thermistors, and other miscellaneous parts.
List of replacement tuners, AC cords, batteries, speakers, transmitters, LCDs, and capacitors.
General
