Sharp LC-32G2X/ TU-32GAX - Deleting a Still Image File; Deleting All Still Image Files

42
Using memory card
Deleting all still image files
2
Press c/d to select “Yes”, and then press
ENTER.
Deleting a still image file
5
6
Press a/b to select “Edit”, and then press
ENTER.
Press MENU and the MENU screen displays.
2
3
Press c/d to select “Card”.
4
Press a/b to select “Still Setup”, and then
press ENTER.
Press a/b to select “Delete File”, and then
press ENTER.
Press a/b/c/d to select the file you want
to delete, and then press ENTER.
7
Press CARD and the card mode screen
displays.
1
Still Video
File 1 File 2 File 3
File 4 File 5 File 6
File 7 File 8 File 9
8
Press c/d to select “Yes”, and then press
ENTER.
Select “Delete All” instead of “Delete File” in
step 6 in Deleting a still image file.
1
Audio Select
Protect
Delete File
Delete All
Slide Show Setup
My Programme
Edit
NOTE
• You cannot delete a protected file on the card.
• Do not turn off the power or take out a card when deleting
a file. The card may malfunction.
NOTE
• You cannot delete a protected file on the card.
• Do not turn off the power or take out a card when deleting
a file. The card may malfunction.
9
Repeat the operations in steps 7 and 8
above.
10
After deleting the images you no longer need,
press RETURN to return to MENU.
LC-32/37G2X-f 04.5.22, 1:50 PM42