To Next Page

To Previous Page

LC-32LE240

LC-40LE240

Output Interface

 Single/dual link 8/10-bit LVDS output

 Supports panel resolution up to Full-HD (1920x1080) @ 60Hz

 Supports TH/TI format

 Supports dithering options to 6/8-bit output

 Spread spectrum output for EMI suppression

CVBS Video Encoder

 Supports all NTSC/PAL TV Standard

 Stand-alone scaling engine

 Programmable Hue, Contract, Brightness

 Supports TTX/CC/WSS output

CVBS Video Output

 Allows CVBS output of all source inputs

2D Graphics Engine

 Hardware Graphics Engine for responsive

 Interactive applications

 Supports point draw, line draw, rectangle draw/fill, text draw and trapezoid draw

 BitBlt, stretch BitBlt, trapezoid BitBlt, mirror BitBlt and rotate BitBlt

 Raster Operation (ROP)

 Support Porter-Duff

VIF Demodulator

 Compliant with NTSC M/N, PAL B, G/H, I, D/K,

 SECAM L/L' standards

 Audio/Video dual-path processor

 Stepped-gain PGA with 25 dB tuning range and 1 dB tuning resolution

 Maximum IF gain of 37 dB

 Programmable TOP to accommodate different tuner gain and SAW filter insertion

loss to

optimize noise and linearity performance

 Multi-standard processing with single SAW

 Supports silicon tuner low IF output architecture

DVB-T Demodulator

 Digital carrier frequency offset correction: ±500KHz

 Optimised for SFN channels with pre/post-cursive echoes inside/outside the guard

 Acquisition range ±857kHz includes up to 3x ±1/6 MHz transmitter offset

 Meets Nordig Unified 1.0.3, D-Book 5.0, EICTA E-Book/C-Book test requirement

 ±400kHz internal carrier offset recovery range

 6.8 usecs echo cancellation at 7 Msym/s

 Supports IF, low-IF, zero-IF inputs

 Ultra-fast automatic blind UHF/VHF channel scan (constellations and symbol rate)

Connectivity

 Two USB 2.0 host ports

Output Interface

 Single/dual link 8/10-bit LVDS output

 Supports panel resolution up to Full-HD (1920x1080) @ 60Hz

 Supports TH/TI format

 Supports dithering options to 6/8-bit output

 Spread spectrum output for EMI suppression

CVBS Video Encoder

 Supports all NTSC/PAL TV Standard

 Stand-alone scaling engine

 Programmable Hue, Contract, Brightness

 Supports TTX/CC/WSS output

CVBS Video Output

 Allows CVBS output of all source inputs

2D Graphics Engine

 Hardware Graphics Engine for responsive

 Interactive applications

 Supports point draw, line draw, rectangle draw/fill, text draw and trapezoid draw

 BitBlt, stretch BitBlt, trapezoid BitBlt, mirror BitBlt and rotate BitBlt

 Raster Operation (ROP)

 Support Porter-Duff

VIF Demodulator

 Compliant with NTSC M/N, PAL B, G/H, I, D/K,

 SECAM L/L' standards

 Audio/Video dual-path processor

 Stepped-gain PGA with 25 dB tuning range and 1 dB tuning resolution

 Maximum IF gain of 37 dB

 Programmable TOP to accommodate different tuner gain and SAW filter insertion

loss to

optimize noise and linearity performance

 Multi-standard processing with single SAW

 Supports silicon tuner low IF output architecture

DVB-T Demodulator

 Digital carrier frequency offset correction: ±500KHz

 Optimised for SFN channels with pre/post-cursive echoes inside/outside the guard

 Acquisition range ±857kHz includes up to 3x ±1/6 MHz transmitter offset

 Meets Nordig Unified 1.0.3, D-Book 5.0, EICTA E-Book/C-Book test requirement

 ±400kHz internal carrier offset recovery range

 6.8 usecs echo cancellation at 7 Msym/s

 Supports IF, low-IF, zero-IF inputs

 Ultra-fast automatic blind UHF/VHF channel scan (constellations and symbol rate)

Connectivity

 Two USB 2.0 host ports

 USB architecture designed for efficient support of external storage devices in

conjunction with

off air broadcasting

Miscellaneous

 DRAM interface supporting one 16-bit DDR2 @1066MHz

 Supports PVR

 Supports Common Interface for conditional access support

 Bootable SPI interface with serial flash support

 Parallel interface for external NAND flash support

 Power control module with ultra low power MCU available in standby mode

 380-ball LFBGA package

 Operating Voltages: 1.26V (core), 1.8V (DDR2), 2.5V and 3.3V (I/O and analog)

5.2. MSTAR Block Diagram

Brand	Sharp
Model	LC-32LE240EV
Category	LCD TV
Language	English

Sharp LC-32LE240EV User Manual

Table of Contents

Questions and Answers:

Sharp LC-32LE240EV Specifications

Related product manuals