EasyManuals Logo

Sharp LC-45GD5U User Manual

Sharp LC-45GD5U
173 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
13
LC-45GD5U
Using external equipment
Recording digital programs with AV-HDD
recorder/Blu-ray Disc recorder
Before commencing this procedure, the steps in
“i.LINK Setup” on page 54 need to be completed
beforehand.
Please also refer to the operation manual of the AV-
HDD recorder/Blu-ray Disc recorder to be used with
this TV.
Press / / / to select “REC Oper.”, and
then press ENTER.
Press / / / to select
Æ
, and then press
ENTER.
Recording starts.
Select “REC STOP” and press ENTER to stop
recording.
3
4
NOTE
Input mode cannot be switched to i.LINK during recording.
When the input mode is i.LINK, you cannot operate
recording.
When an AV-HDD recorder/Blu-ray Disc recorder
connected to the TV is under timer recording, the recorder
cannot be operated using the TV’s control panel.
Play Ope.
REC PAUSE
REC STOP
Model
Input
PWR
PLAY
OPE-
RATION
Free 61%
STOP
06
– – : – –: – –
Playing back using REC LIST (i.LINK)
•You can display a list of the programs you have
recorded on AV-HDD recorder and Blu-ray Disc.
Press i.LINK to display the i.LINK control
panel.
Press / / / to select “REC LIST”, and
then press ENTER to display the REC LIST.
1
2
Press / to select the desired program,
and then press ENTER.
Press / to select “PLAY”, and then press
ENTER.
Press / to select “From Top” or “From
current position”, and then press ENTER.
3
4
5
NOTE
•A program in the REC LIST may be deleted by performing:
Select the program Press ENTER Select “DELETE”
on REC LIST Press ENTER Select “Delete” Press
ENTER
•A program in the REC LIST may be locked or unlocked
by performing:
Select the program Press ENTER Select “LOCK/
UNLOCK” Press ENTER
Depending on the device connected, the audio and
images of the program selected with the cursor may not
be displayed in the small play screen.
Depending on the device connected, when the recording
list is displayed during recording, the recording may stop.
The program information displayed in the title (Program
name, date and time, etc.) will be taken from the program
information for the program broadcast at the time
recording commenced.
When recording several programs in succession, the
program information displayed will be that of the first
program recorded at the time recording originally
commenced.
When playing back content recorded on other devices,
the program information in the title may not be displayed
correctly in some cases.
Description
Playback will start from the beginning of the
selected program.
Playback will start from the point playback
stopped last time.
Selected item
From top
From current
position
Select a digital program to be recorded.
Press i.LINK to display the i.LINK control
panel.
1
2
06
Capacity: Free 61%
HD
HD
HD
HD
HD
PLAY DELETE LOCK/UNLOCK
Appendix
Removing the stand
Before detaching (or attaching) stand, unplug the AC cord from the AC input terminal.
CAUTION
Do not remove the stand from the TV unless using an optional wall mount bracket to mount it.
Before attaching/detaching stand
Before performing work make sure to turn off the TV.
Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being
damaged.
NOTE
•To attach the stand, perform the above steps in reverse order.
2
Unfasten the four screws used to
secure the stand in place.
1
Unfasten the screw used to
secure the bracket in place.
Setting the TV on the wall
CAUTION
Installing the Liquid Crystal Television requires special skill that should only be performed by qualified service
personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper
mounting or mounting that results in accident or injury.
Using an optional bracket to mount the TV
•You can ask a qualified service professional about using an optional AN-37AG2 bracket to mount the TV to
the wall.
Carefully read the instructions that come with the bracket before beginning work.
Hanging on the wall
AN-37AG2 wall mount bracket. (See the bracket instructions
for details.)
About setting the TV angle
CAUTION
Do not remove the stand from the TV unless using an optional bracket to mount it.
Vertical mounting Angular mounting
3
Detach the stand from the TV.
(Hold the stand so it will not drop from
the edge of the base area.)
Angle of TV
LC-45GD5U
5
'"
\|
\|
'"\|
'"\|
'"\|

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sharp LC-45GD5U and is the answer not in the manual?

Sharp LC-45GD5U Specifications

General IconGeneral
BrandSharp
ModelLC-45GD5U
CategoryLCD TV
LanguageEnglish

Related product manuals