LC-60/70LE740E/RU,741E/S,743E,60LE840E/RU,841E/S,843E,80LE645E/RU,646E/S,648E
5 – 21
8. When all the procedures are complete, the following upgrade success screen shows up.
The new software version can be confirmed on screen.
After a while, Turn off power and boot-up automaticaly.
NOTE: TV is restarted automaticaly, the AC code need not be pulled out.
9. After boot-up, the following caution shows up.
Select OK when if there is no problem.
Software update is completed, please remove the USB memory device.
NOTE: Then get the set started and call the process adjustment screen (Top Page) to check the main software version.
Update version
xxxxxxxxxxxx
[Information Software update USB update]
Software Update is complete.
TV
System software was successfully updated.
Remove the USB memory device.
Update version
: EXXXXXXX-2
To Next Page
Loading...
