71
Appendix
Mounting the TV on a wall
To use this TV mounted on a wall, remove the AC cord holder and the screws at the 4 locations on the rear of the TV,
and then use the screws supplied with the wall mount bracket to secure the bracket to the rear of the TV.
2
1
1
• This TV should be mounted on a wall only with the wall mount bracket and attachment* available from SHARP (Page 5).
The use of other wall mount brackets may result in an unstable installation and may cause serious injuries.
• Mounting the LCD colour TV requires special skills and should only be performed by qualified service personnel.
Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or
mounting that results in accident or injury.
• You can ask qualified service personnel about using an optional bracket and attachment* to mount the TV to a wall.
• When you mount the TV on a wall, you should attach the supporting post.
• Detach the AC cord holder on the rear of the TV before mounting the TV on a wall.
* Only for 40 inch models
Hanging on the wall
AN-37AG2 + AN-37P30 or AN-52AG4 wall
mount bracket (see the bracket instructions for
details).
Vertical mounting Angular mounting
About setting the TV angle
0/5/10°
0/5/10°/15°/20°
0/5/10°/15°/20°
AN-52AG4
(LC-60LE830X)
AN-52AG4
(LC-52/46LE830X)
AN-37AG2+AN-37P30
(LC-40LE830X)
E
Wall mount audio setup
When you mount the TV on a wall, you can adjust the sound to a more suitable one by setting this function to “Yes”.
Go to “Menu” > “Setup” > “View setting” > “Wall mount audio setup”.
To Next Page
Loading...
Need help?
General