Sharp LC-90LE740X User Manual

LC-90LE740X
5 – 5
5. List of adjustment process mode menu
The character string in brackets [ ] will appear as a page title in the adjustment process menu header.
Page Line Item Description Remarks (adjustment detail, etc.)
1/20
1 MAIN Version 1xxx(xxxxx) Main software version
2 BOOT Version xxxxxxx BOOT Version
3 Monitor Version xxxxxxx Monitor software version
4 T-CON Version / LED CON Version xxxxxxxx/xxxx T-CON/H.264 Version
5 NET TV KEY / MAC xxx/xxxx MAC Address
6 CI + INFO / SECURE BOOT xxxxx/NO CI + Key Information / SECURE BOOT
7MARLIN
8FRC Version
9 IR Micom Version
10 LAMP ERROR 0 Number of termination due to lamp error.
11 MONITOR ERR CAUSE 1) xxxxxx 2) xxxxxx
3) xxxxxx 4) xxxxxx
Last error standby cause.
12 NORMAL STANDBY CAUSE 0 Situsation that became standby at the end.
(Excluding the error) Refer to 7. STANDBY CAUSE FUNC-
TIONS.
13 ERROR STANDBY CAUSE 0 0 0 0 Error standby cause. Refer to 7. STANDBY CAUSE FUNC-
TIONS.
2/20
1 INDUSTRY INIT Enter Initialization to factory settings execution.
2 INDUSTRY INIT (-Public) OFF Initialization to factory settings execution.
(Public mode is excluded)
3 PUBLIC MODE OFF Public mode ON/OFF setting
4 Center Acutime — Main operating hours.
5 RESET OFF Main operating hours reset.
6 Backlight Acutime — Backlight operating hours.
7 RESET OFF Backlight operating hours reset.
8 LAMP ERROR RESET OFF Lamp error reset.
9 ADJ PARAM SET Enter ADJ PARAM SET
10 VIC XPOS 0 X-coordinate setting for VIC READ
11 VIC YPOS 0 Y-coordinate setting for VIC READ
12 VIC SIGNAL TYPE MAIN Signal type setting for VIC READ
13 VIC READ OFF Picture level acquisition function
(Level appears in green on the upper right)
3/20
1 TUNER ADJ Enter TUNER auto adjustment execution
2 PAL+TUNER ADJ Enter PAL TUNER auto adjustment execution
3 TUNER ADJ (CA-8CH) Enter TUNER auto adjustment execution (CA-8CH)
4 PAL+TUNER ADJ (CA-8CH) Enter PAL TUNER auto adjustment execution (CA-8CH)
5 TUNER ADJ (SMPTE) Enter TUNER auto adjustment execution (SMPTE)
6 PAL+TUNER ADJ (SMPTE) Enter PAL TUNER auto adjustment execution (SMPTE)
7 TUNER ADJ (SMPTE CH57) Enter TUNER auto adjustment execution (SMPTE CH57)
8 PAL+TUNER ADJ (SMPTE CH57) Enter PAL TUNER auto adjustment execution (SMPTE CH57)
9 TUNER CONTRAST A_GAIN 14 TUNER signal level adjustment
10 TUNER CONTRAST D_GAIN 2048 TUNER signal level adjustment
11 TUNER CONTRAST OFFSET 256 TUNER signal level adjustment
4/20
1 PAL ADJ Enter PAL adjustment
2 SECAM ADJ Enter SECAM adjustment
3 N358 ADJ Enter N358 adjustment
4 PAL CONTRAST A_GAIN 14 PAL contrast adjustment
5 PAL CONTRAST D_GAIN 2048 PAL contrast adjustment
6 PAL CONTRAST OFFSET 256 PAL contrast adjustment
7 SECAM CONTRAST A_GAIN 14 SECAM contrast adjustment
8 SECAM CONTRAST D_GAIN 2048 SECAM contrast adjustment
9 SECAM CONTRAST OFFSET 256 SECAM contrast adjustment
10 N358 CONTRAST A_GAIN 14 N358 contrast adjustment
11 N358 CONTRAST D_GAIN 2048 N358 contrast adjustment
12 N358 CONTRAST OFFSET 256 N358 contrast adjustment

Sharp LC-90LE740X Specifications

General

Brand	Sharp
Model	LC-90LE740X
Category	LCD TV
Language	English