LC-90LE740X
5 ā 7
14/20
1 T-CON VERSION EXT.1
2 T-CON VERSION EXT.2
3 T-CON VERSION EXT.3
4 T-CON VERSION EXT.4
15/20
1 3D HDMI FPGA Version
22Dā3D FPGA Version
3 3D LED BRIGHTNESS 90
4 3D IR EMITTER CONTROL ON
16/20
1 CROSS TALK ADJ MODE OFF
2 CROSS TALK TH1
3 CROSS TALK TH2
4 CROSS TALK TH3
5 CROSS TALK TH4
6 CROSS TALK GAIN1
7 CROSS TALK GAIN2
8 CROSS TALK GAIN3
17/20
1 WIFI SSID 2.4GHz AF00
2 WIFI SSID 5GHz AF50
3 WIFI RSSI 2.4GHz -50
4 WIFI RSSI 5GHz -50
5 WIFI TIME 2.4GHz 10
6 WIFI TIME 5GHz 10
7 WIFI RSSI TEST 2.4GHz and 5GHz
RSSI(Passive)
8 WIFI RSSI RESULT 2.4GHz ERR - 1,
5GHz ERR - 1
18/20
1 READ/WRITE READ Read/Write
2 SLAVE/ADDRESS SLAVE0 Slave address
3 REGISTER ADDRESS 0x 0 Register address
0x 0
4 WRITE DATA 0x 0 Writing data
0x 0
5 READ DATA 0x 0 Reading data
0x 0
19/20
1 ERROR STANDBY CAUSE 1 NO RECORD ERROR STANDBY CAUSE
2 ERROR STANDBY CAUSE 2 NO RECORD
3 ERROR STANDBY CAUSE 3 NO RECORD
4 ERROR STANDBY CAUSE 4 NO RECORD
5 ERROR STANDBY CAUSE 5 NO RECORD
6 STANDBY CAUSE RESET OFF Reset stand by cause.
20/20
1 EEP SAVE OFF Writing setting values to EEPROM.
2 EEP RECOVER OFF Reading setting values from EEPROM.
3 MONITOR ERROR CAUSE RESET OFF Reset of monitor error cause
4 MODEL NAME LE840X MODEL NAME
5 PANEL SIZE 60 Panel size setting.
6 VER UP FLAG ENABLE Enter
7 PANEL LIMIT ON
8 PANEL RANGE LIMIT 230
9 SHORT CHECK MODE Enter Check LED Back Light
10 SHORT CHECK CURRENT 60
11 PRODUCT EEP ADR 0x 0 Don't touch when serving (for producer of factory)
12 PRODUCT EEP DATA 0x 0 Don't touch when serving (for producer of factory)
13 PRODUCT FACTORY 0x 0 Don't touch when serving (for producer of factory)
14 TEST NETWORK UPDATE NO Don't touch when serving (for producer of factory)
Page Line Item Description Remarks (adjustment detail, etc.)
To Next Page
Loading...
Need help?
General
