LC-20S7U
OPERATION MANUAL
ENGLISH
IMPORTANT:
To aid reporting in case
of
loss
or
theft, please record the
TV's
model and serial numbers in the space provided. The numbers
are located at the rear
of
the TV.
IModel No.:
Senal
No.:
IMPORTANT INFORMATION
WARNING:
TO
REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO
NOT EXPOSE THIS PRODUCT
TO
RAIN OR MOISTURE.
The lightning flash with arrow-head symbol,
within
an
equilateral triangle,
is
intended to
alert the user to the presence
of
uninsulated
"dangerous voltage" within the product's
enclosure that may
be
of sufficient magnitude
to constitute a risk of electric shock to persons.
CAUTION:
TO
REDUCE
THE
RISK
OF
ELECTRIC
SHOCK,
DO
NOT
REMOVE
COVER
(OR
BACK).
NO
USER-SERVICEABLE
PARTS
INSIDE.
REFER
SERVICING
TO
QUALIFIED
SERVICE
PERSONNEL.
The exclamation point within a triangle is
intended to alert the user to the presence
of important operating and maintenance
(servicing) instructions
in
the literature
accompanying the product.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE
SLOT, FULLY INSERT.
CAUTION:
DO NOT PLACE THIS PRODUCT ON AN UNSTABLE CART, STAND, TRIPOD, BRACKET,
OR
TABLE. THE PRODUCT MAY FALL CAUSING SERIOUS PERSONAL INJURY
AND
SERIOUS
DAMAGE TO THE PRODUCT. USE ONLY WITH A CART, STAND, TRIPOD, BRACKET, OR TABLE
RECOMMENDED BY THE MANUFACTURER
OR
SOLD WITH THE PRODUCT. FOLLOW THE
MANUFACTURER'S INSTRUCTIONS WHEN INSTALLING THE PRODUCT AND USE MOUNTING
ACCESSORIES
RECOMMENDED
BY
THE
MANUFACTURER.
A
PRODUCT
AND
CART
COMBINATION SHOULD BE MOVED WITH CARE. QUICK STOPS, EXCESSIVE FORCE, AND
UNEVEN SURFACES MAY CAUSE THE PRODUCT AND CART COMBINATION TO OVERTURN.
I U.S.A. ONLY I
WARNING: FCC Regulations state that any unauthorized changes
or
modifications to this equipment not expressly
approved by the manufacturer could void the user's authority to operate this equipment.
"Note
to
CATV
system
installer:
This
reminder
is
provided
to
call
the
CATV
system
installer's attention
to
Article 820-40 of
the
National
Electrical
Code
that provides guidelines for proper
grounding
and,
in
particular, specifies that
the
cable
ground
shall
be
connected
to
the
grounding
system
of
the
building,
as
close
to
the
point of
cable
entry
as
practical." IU.S.A. ONLY I
This product utilizes tin-lead solder, and fluorescent lamp containing a small amount
of
mercury. Disposal
of
these materials
may be regulated due to environmental considerations. For disposal
or
recycling information, please contact your local
authorities
or
the Electronic Industries Alliance: www.eia.org
Trademarks
• Manufactured under license from Dolby Laboratories.
@1
To Next Page
Loading...
Need help?
General
